leadermac

Leadermac 4-Side Moulder LMC THUNDERMAC 80~150 m/min Jointed Moulder

Ho Chi Minh City
  • 175 Hoa Lan Str., Ward 2, Phu Nhuan Dist. Hochiminh City. Vn
  • (+84) 8 3517 3407
  • (+84) 8 3517 3402
  • Vetta@vetta.com.vn
View Map
  • 42/17 DT743, Binh Phuoc B, Binh Chuan, Thuan An,Binh Duong
  • (84.650) 3712 771
  • (84.650) 3712 768
  • binhduong@vetta.com.vn
View Map
  • 832 Hung Vuong Str, Nhon Phu ward, Qui Nhon city
  • (+84) 563 848176
  • (+84) 563 848213
  • Quinhon@vetta.com.vn - sales@vetta.com.vn
View Map
Advantage

Leadermac 4-Side Moulder LMC THUNDERMAC 80~150 m/min Jointed Moulder

  • All moulders with CE Certification if desired.
  • Faster feed speeds of up to 80 meters a minute (265 fpm) are standard - to 185 mpm (610fpm) - optional.
  • Programmable Controller provides convenient thickness and width of cut settings.
  • Adjustment of each spindle can be easily performed using the front of the machine adjustment ·Exclusive, separate adjustment of the vertical spindles and the support tables allows the tables to be positioned extremely close to the cutterheads for added cutting stability.
  • The full safety enclosure serves as a chip guard and helps to reduce noise and is equipped with Strobe Free Lighting.
  • Each spindle is driven by an individual motor for powerful moulding and easy control.
  • Multiple pneumatic pressure of the feed rolls can be easily set to provide an outstanding feeding effect.
  • Table surfaces, guides, chip Breaker shoes and Pressure plates are hard-chrome plated for maximum wear resistance.
  • All manually adjusted & turning parts are housed in dry grease lubricated bearings for oil-free lubrication.
  • Automatic lubricator is provided to supply oil to the feed tables.
  • One-piece, Extra Heavy machine frame is specially heat treated for maximum stability and rigidity by standard configuration.
  • The powered Top & Bottom Full Width outfeed rolls provide stable and smooth workpiece outfeed even for especially thin or smooth materials. The rolls remain perfectly parallel even after long-term use.
  • Mechanical digital Readouts for all head axis and pressure elements & Chip Breaker Shoes and Pressure Plates of the Top spindle(s).
  • Sectional Chip Breaker Assembly in front of top spindle(s).
  • Motorized vertical adjustment of the top spindle including PC Setworks & Digital Readouts.
  • Finest Alloy Steel Spindles and housings with 2 sets of Ultra Precision Duplex Bearings in each spindle. All are permanently grease lubricated.
  • All horizontal Spindles outfitted with Quick Loc Hydro-loc Outboard Bearings and Cutterhead supports.
  • Built in Straight & Profile jointers provide accurate operation with high quality finish.
  • The full Safety Enclosure is heavy gauge steel & serves as a chip guard and helps reduce noise.
  • It is equipped with Strobe Free Lighting.

Thundermac_03

FULLY AUTOMATIC FEEDING SYSTEM (Optional)

When the system detects the workpiece on the infeed chains, the hydraulic feed system will pneumatically lower and activate the top roller to feed the workpiece into the machine. This provides constant and stable feed, reducing labor requirements and decreasing cycle time.

Thundermac_05

CENTRALIZED LUBRICATION POINTS

Greasing to all critical parts is conveniently made by the centralized arrangement of lubrication points.

Thundermac_06

CONVENIENT SPINDLE ADJUSTMENT

Adjustment of all spindles is easily done from the front. The adjustment points are all at the same height, for more convenient and faster adjustment.

Thundermac_04

FULLY AUTOMATIC FEEDING SYSTEM (Optional)

When the system detects the workpiece on the infeed chains, the hydraulic feed system will pneumatically lower and activate the top roll to feed the workpiece into the machine. This provides constant and stable feed, reducing labor requirements and decreasing cycle time.

DESIGNED FOR PARAMOUNT STABILITY

Powerful, heavy-duty pneumatic side and pressure shoes for the left spindle provide extremely stable pressure for high-speed operations. A pneumatic Top Pressure Roller System in front of the right vertical spindle ensures constant stock feed.

POWERED INFEED ROLLER

The smooth initial feeding of the stock is achieved by means of the independently powered Top & Bottom Infeed Rolls.

Thundermac_09

SELF ACTUATING CLUTCH TYPE FIRST TOP FEED ROLL

The first feed roll (with Built in clutch) is powered, but with high speed infeed, the roll will run freely, eliminating potential damage to the workpiece and machine. This allows for smooth operation with exceptionally high feed speeds.

Thundermac_07

HEAVY DUTY GEARBOX & MOTOR

The feed rollers are driven through a combination of universal shafts and gearboxes, ensuring no loss of power transmission. A smooth feeding effect is assured. Heavy duty gearboxes have no backlash and provides powerful and accurate feeding performance.

Thundermac_08

FEED SYSTEM

The infeed rolls work in conjunction with a limit switch (anti double-up gate) to stop the machine feed if the workpiece is too thick or there is double up


A Wide Range of Spindle Configurations (other configurations available on request)

Thundermac_523t

LMC-523 5-SPINDLE

Thundermac_623t

LMC-623 6-SPINDLE

Thundermac_723t

LMC-723 7-SPINDLE

Thundermac_823t

LMC-823 8-SPINDLE

Thundermac_923t

LMC-923 9-SPINDLE

Thundermac_1023t

LMC-1023 9-SPINDLE

 

Technical data
LMC 223T to LMC 1123T or LMC 230T to LMC 330T: Standard Base Equipment Available Options
Number of Spindles (Min - Max) 2 to 11  
Working width (with a head cutting circle of 163mm) 20~230mm (0.78"~9.1")  
Working Thickness (with a head cutting circle of 163mm) 10~150mm (0.39"~6") 260mm (10.2") or 300mm (12")
Basic Spindle Motor capacity (Wye Delta Soft Starts on All Motors) 17.5 7 22 KW / 20 & 30HP to 200mm (8")
Spindle Speed 6000 RPM to 45KW (60HP)
Spindle Diameter 50mm or 1 13/16" or 2 1/8" 7200 RPM or 8000 RPM
Tool Cutting Circle,1st Bottom Spindle, min-max 160~260mm (6.3"~10.25")  
Tool Cutting Circle, Vertical Spindles,min-max 160~260mm (6.3"~10.25")  
Tool Cutting Circle, Horizontal Spindles, Top, min-max 160~260mm (6.3"~10.25")  
Tool cutting circle, Horizontal Spindles, Bottom, min-max 160~260mm (6.3"~10.25")  
Feed Motor - Standard 15 KW / 20HP  
Feed Speed, infinitely variable by VFD Inverter duty Motor 8-80 m/min (25~265FPM) to 30kw (40 HP)
Top Feed Roller Diameter 205.36mm (8") 120m/min (400FPM), 160m/min (533FPM)
Top Feed Roller Width 3 x 50mm (2")  
Pneumatic Pressure for feed rollers, max 6 bar (85psi)  
Adjustment range for Infeed Table and edge-jointing Fence 10mm (0.4")  
Adjustment range for Vertical Spindles (axial) 80mm (3.2")  
Adjustment range for Horizontal spindles (axial) 40mm (1.6")  
Length of the Infeed Straightening Table 0.8M (32")  
Clutch Roll on 1st top Infeed Roll Included  
Digital Readout and Quick Set to Main guide & Infeed Rolls(Btm Head Cut-table) Included  
Quick Set Setworks on Near Side Head(s) & Top Head(s) (Radial Set) Included  
Mechanical Digital Readouts for the Spindles, Top Head Chip Breakers Included  
Full Sound and Safety Enclosure w/ Strobe-free Lighting Included  
Motorized vertical adjustment of Feed Beam with Top Feed Rolls Included Extra Insulation with Steel Punched Sheet Steel Ineterior
Pneumatic Lateral Pressure Roller Systems on Infeed & opposite first right spindle Included  
Extra HD Chainless Cardan Shaft Feed System w/ExHD Gearboxes Included  
Diameter of Dust Hood for Vertical Spindles Ø200mm (7.9") optional on all Axis and SmartSet Controls as noted Below optional
Diameter of Dust Hood for Horizontal Spindles Ø230mm (9.1")  
Video

 

Customer reviews
Vetta Head Office
  • 175 Hoa Lan Str., Ward 2, Phu Nhuan Dist. Hochiminh City. Vn
  • (+84) 8 3517 3407
  • (+84) 8 3517 3402
  • Vetta@vetta.com.vn
  • View map
Qui nhon branch
  • 832 Hung Vuong Str, Nhon Phu ward, Qui Nhon city
  • (+84) 563 848176
  • (+84) 563 848213
  • Quinhon@vetta.com.vn - sales@vetta.com.vn
  • View map
Vetta showroom- Binh Duong branch
  • 42/17 DT743, Binh Phuoc B, Binh Chuan, Thuan An,Binh Duong
  • (84.650) 3712 771
  • (84.650) 3712 768
  • binhduong@vetta.com.vn
  • View map